Same-Day Service · All Major Brands
Washing Machine Repair in Abu Dhabi
A washing machine that won't drain, spin, or start is one of the most disruptive appliance failures in an Abu Dhabi household — there's rarely a backup for it. One Click Technicians repairs all major brands and machine types across Abu Dhabi, including Mussafah, Khalifa City, Al Reem Island, and Yas Island, with same-day appointments in most cases.
What's Actually Included When You Book
Every job starts with an actual diagnosis, not a guess. A technician opens the machine, identifies the specific fault, and gives you a fixed price before touching anything further. Common parts — belts, pumps, door seals, and control boards for major brands — are carried on the van, so most faults are fixed on the first visit. Every repair comes with a 90-day workmanship warranty. If the same fault comes back within that window, we return and fix it at no extra cost.
What's Actually Wrong With Your Washing Machine?
Most washing machine faults fall into a handful of patterns. Here's what we actually find when we open the machine up, and roughly what each one costs to put right — so you have a sense of the number before a technician even arrives.
| Symptom | Likely cause | Typical price |
|---|---|---|
| Won't drain | Usually a clogged pump filter or a blocked/kinked drain hose. Less often, the drain pump motor itself has failed, or the pressure sensor that tells the machine the tub is empty is faulty. | AED 150 – 450 |
| Won't spin | A snapped or slipping drive belt is the most common cause on older top-loaders. On front-loaders, it's usually the door lock switch failing to confirm the door is shut, or worn motor carbon brushes. | AED 200 – 450 |
| Leaking water | Front-loaders: a worn door seal (gasket) is the usual suspect, especially past year 3–4. Also common: a failed water inlet valve, a loose or perished hose connection at the back of the machine, or a worn drum bearing letting water past the seal — this one costs more to fix. | AED 180 – 700 |
| Stops mid-cycle, especially at rinse | Most often a door lock or pressure sensor fault stopping the cycle as a safety measure — the machine 'thinks' something is wrong, even when it isn't. A blocked drain filter restricting water flow mid-rinse is the other common cause, particularly on LG, Samsung, and Bosch models. | AED 180 – 450 |
| Top-loader not agitating | A worn or broken agitator dog (a small ratcheting part that lets the agitator turn one way but not the other) is the classic cause on older top-loaders. Less often, a worn drive coupling or belt is slipping under load. | AED 180 – 400 |
| Loud grinding or banging | Worn drum bearings cause a deep grinding noise that gets louder over a wash cycle — this needs a drum strip-down to fix properly. A banging or knocking sound is more often an unbalanced load or an unlevel machine. | AED 150 – 600 |
| Won't start / no power | Check the obvious first: socket, plug, and that the door is fully latched (front-loaders won't start with the door ajar — this trips people up constantly). Beyond that: a blown thermal fuse or a faulty control board. | AED 150 – 900 |
| Door won't lock or unlock | The door lock/interlock mechanism itself has failed — a genuinely common fault on Bosch and Siemens front-loaders specifically, because of how their safety interlock is designed. | AED 180 – 350 |
| Burning smell | Stop using the machine immediately. Usually an overheating motor or a slipping belt generating friction heat, sometimes a blocked motor vent. This is the one fault on this list where we'd tell you not to wait for an appointment. | AED 200 – 600 |
Won't drain
AED 150 – 450
Usually a clogged pump filter or a blocked/kinked drain hose. Less often, the drain pump motor itself has failed, or the pressure sensor that tells the machine the tub is empty is faulty.
Won't spin
AED 200 – 450
A snapped or slipping drive belt is the most common cause on older top-loaders. On front-loaders, it's usually the door lock switch failing to confirm the door is shut, or worn motor carbon brushes.
Leaking water
AED 180 – 700
Front-loaders: a worn door seal (gasket) is the usual suspect, especially past year 3–4. Also common: a failed water inlet valve, a loose or perished hose connection at the back of the machine, or a worn drum bearing letting water past the seal — this one costs more to fix.
Stops mid-cycle, especially at rinse
AED 180 – 450
Most often a door lock or pressure sensor fault stopping the cycle as a safety measure — the machine 'thinks' something is wrong, even when it isn't. A blocked drain filter restricting water flow mid-rinse is the other common cause, particularly on LG, Samsung, and Bosch models.
Top-loader not agitating
AED 180 – 400
A worn or broken agitator dog (a small ratcheting part that lets the agitator turn one way but not the other) is the classic cause on older top-loaders. Less often, a worn drive coupling or belt is slipping under load.
Loud grinding or banging
AED 150 – 600
Worn drum bearings cause a deep grinding noise that gets louder over a wash cycle — this needs a drum strip-down to fix properly. A banging or knocking sound is more often an unbalanced load or an unlevel machine.
Won't start / no power
AED 150 – 900
Check the obvious first: socket, plug, and that the door is fully latched (front-loaders won't start with the door ajar — this trips people up constantly). Beyond that: a blown thermal fuse or a faulty control board.
Door won't lock or unlock
AED 180 – 350
The door lock/interlock mechanism itself has failed — a genuinely common fault on Bosch and Siemens front-loaders specifically, because of how their safety interlock is designed.
Burning smell
AED 200 – 600
Stop using the machine immediately. Usually an overheating motor or a slipping belt generating friction heat, sometimes a blocked motor vent. This is the one fault on this list where we'd tell you not to wait for an appointment.
"Won't Spin" and "Won't Drain" Are Often the Same Fault
Most machines refuse to spin at all until a pressure sensor confirms the tub is genuinely empty — spinning a drum still full of water risks serious damage, so it's blocked as a safety measure rather than attempted anyway. That means a machine that "won't spin" and a machine that "won't drain" are frequently the exact same underlying fault showing up as two different symptoms, not two separate problems. It's why we always check the drain path first on a no-spin complaint before assuming a genuine spin-side fault like a worn belt or a failing door lock switch — clearing a blocked filter can resolve what looked like a spin problem without replacing anything spin-related at all.
What Your Error Code Means
Modern LG, Samsung, Bosch, and Siemens machines display a fault code on their screen or through a flashing light sequence when something goes wrong. Reading this code before you call saves real time on-site.
LG
Drain error — check the pump filter first
Samsung
Water supply issue — check the inlet valve is open
Bosch / Siemens
Drain fault, usually a blocked pump filter
Samsung
Door lock fault — door not detected as closed
Whirlpool
Long fill — water supply too low or a kinked/blocked inlet hose
Try This Before You Call
About one in five call-outs we get turns out to be one of these — worth two minutes of checking first:
- Confirm the socket has power and the plug is fully seated
- Check the water supply valve behind the machine is open
- Make sure the drain hose isn't kinked, and the point it drains into isn't blocked
- Check the load isn't wildly unbalanced (one heavy item like a duvet is a common cause)
- Push the door firmly until it clicks — front-loaders won't start with the door ajar
- Note any error code shown on the display before you call — it cuts diagnosis time significantly
Washing Machine Error Codes Explained
Most modern washing machines display a fault code instead of just stopping — noting the exact code before you call genuinely speeds up diagnosis, since it narrows down the likely cause before a technician even arrives.
Samsung
Water supply error — check the inlet tap is fully open and the hose isn't kinked before assuming a valve fault.
Samsung
Door lock or unbalanced load error — redistribute the wash load; if it persists, the door lock switch has likely failed.
Samsung
Drainage error — usually a blocked pump filter or kinked drain hose, the same fix as a general drain fault.
LG
Drain error — check the pump filter for blockages first; this resolves a large share of OE calls without a part replacement.
LG
Motor overload or locked rotor — often a jammed drum or a failing motor; don't keep re-running the cycle.
LG
DE is a door error (check the door is fully latched); CL means Child Lock is active, not a fault at all.
Generic
Varies by manufacturer, but E1–E4 codes most commonly point to water inlet, heating, drain, or door-related faults in that rough order.
Generic
Usually a water inlet or fill-time-exceeded error — check your water supply pressure and that the tap is open.
Not seeing your brand or exact code here? WhatsApp us with what's displayed anyway — we can talk you through what it likely means before booking a visit.
On the Job
Real Technicians, Real Repairs
Every job starts with a genuine diagnosis, not a guess — a technician opens the machine, identifies the specific fault, and shows you what's actually wrong before quoting a price.
Washing Machine Repair Cost in Abu Dhabi
Repair costs vary by fault type and by machine — a pump filter clear-out and a control board swap are very different jobs. The ranges in the table above cover parts and labour for most residential machines. Three things move the price within that range:
Brand & part cost
European brands like Bosch, Siemens, and Miele use pricier boards and modules than mass-market brands. A control board swap that costs AED 350 on a budget machine can run AED 700–900 on a premium one.
Parts availability
Common parts (pumps, belts, door seals) are usually on the technician's van. Less common boards or drum assemblies for older or less common models sometimes need ordering — that's a second visit, not a price change.
Labour complexity
A pump filter clear takes 20 minutes. A drum bearing replacement means stripping the machine down to the frame — closer to two hours. That difference shows up directly in the quote.
You'll always see the price before we start
A technician diagnoses the actual fault on-site and gives you a fixed number. If it's higher than expected because of a part we didn't anticipate, we say so and get your go-ahead first — no work happens without your confirmation.
* Prices are in AED and are typical ranges for residential machines in Abu Dhabi, inclusive of VAT where applicable. Your exact price is confirmed on-site after diagnosis.
Brands We Repair
We service all major residential brands sold in the UAE. Each one has its own quirks worth knowing before you book — here's what we actually see on each.
LG
Direct-drive inverter motors are generally reliable, but the two faults we see most are drain pump sensor errors and control board moisture damage — the board sits close to the base, and machines installed in humid laundry areas or bathrooms are more exposed to this over time.
Full LG error code guide →Samsung
The Eco Bubble range adds a second motor for the detergent dispenser, which is a common extra failure point beyond the usual suspects. Front-loading WW-series machines are also the ones we see the most door-lock (DL/DC) faults on.
Full Samsung error code guide →Bosch
Genuinely durable machines, but when something does go on a Bosch, it's usually a control module or drum bearing — both pricier parts, and boards sometimes need ordering rather than being carried on the van. Villas running these hard for 6–7+ years see bearing wear first.
Full Bosch error code guide →Siemens
Siemens and Bosch share the same parent company and much of the same parts platform, so the failure patterns are nearly identical. Siemens-branded parts run marginally more than the equivalent Bosch part for the same job.
Full Siemens error code guide →Whirlpool
Common in furnished apartments and older villas. Base models use a simpler mechanical design with fewer electronic sensors, which in practice means faster and cheaper repairs when something does go wrong.
Panasonic
Popular in mid-range residential setups. On top-load models specifically, the pulsator/impeller assembly is the component that wears fastest under the daily heavy-use patterns common in larger households.
Maytag
Marketed on heavy-duty "commercial technology" branding, most common on top-load models. The motor coupling — the part connecting the motor to the transmission — is a known wear item, and its failure often gets mistaken for a bigger transmission fault when it's actually a cheap, fast swap.
Haier
A common choice for budget-friendly apartments and staff accommodation. Simpler electronics mean fewer sensor faults overall, but the drain pump and door seal are the two components we replace most often, given the heavier daily-use patterns typical in shared living setups.
Beko
Most current Beko front-load machines run a ProSmart inverter motor, backed by a long motor warranty on many models — worth checking before paying for a motor repair on a newer unit. Door seal and drain pump faults are still the most common call-outs; genuine motor failures are comparatively rare within that warranty window.
Electrolux
Current UltimateCare-range machines use UltraMix, which pre-mixes detergent with water before it reaches the drum, and SensorWash, which adjusts the cycle based on load size and soil level. Both add electronic sensors beyond a basic machine, so a "cycle behaving oddly" complaint is worth diagnosing against these features specifically rather than assuming a generic control-board fault.
Don't see your brand listed? We service other brands too — Miele, Ariston, Hisense, Daewoo, Zanussi, AEG, Toshiba, Indesit, Hoover, Candy, and Midea, and more. Call to confirm before booking if you're unsure.
Commercial & Industrial Laundry Equipment
Hotels, gyms, spas, laundromats, and staff accommodation run washers and dryers at a genuinely different duty cycle than a household machine — often multiple loads a day, every day, with far less tolerance for downtime than a home laundry room.
We repair industrial-capacity washers and dryers, coin-operated and card-operated machines, and full laundromat setups, alongside hotel and staff-accommodation laundry rooms running multiple units. Commercial-capacity machines use heavier-duty bearings, drive systems, and control boards than residential equivalents, and are diagnosed and quoted on that basis rather than residential pricing.
Front-Load, Top-Load, or Semi-Automatic — Does It Matter?
It affects both what tends to go wrong and what the repair costs. Here's the honest breakdown.
Front-load
The most common type in Abu Dhabi apartments — space efficient and stackable with a dryer. Repairs are generally more involved: fixing a drum bearing or door seal means partly disassembling the machine, which shows up as higher labour cost than an equivalent top-load repair.
Top-load (fully automatic)
More common in villas with dedicated laundry rooms. The agitator or impeller mechanism is simpler than a front-loader's drum-and-bearing setup, there's no door seal to wear out, and most repairs are faster and cheaper as a result.
Semi-automatic (twin-tub)
Still used in staff accommodation and budget setups. Mechanical, timer-based, and cheap to fix when something goes wrong — the parts themselves are inexpensive, though fewer technicians train on these machines now than a decade ago, worth confirming when you call.
Washer-dryer combo (all-in-one)
One drum handles both washing and drying — common in smaller apartments with no separate dryer hookup. More components share one drum than in a standalone washer, so diagnosis takes a little longer to isolate whether the wash side, the dry side, or a shared part (drum bearing, door seal) is actually at fault.
Why Washing Machines Fail Faster in Abu Dhabi
A few local factors show up again and again in the machines we open — most competitors don't mention any of this, but it's genuinely useful to know.
- Rooftop water storage tanks
- Abu Dhabi's desalinated water isn't especially hard, but many buildings store it in rooftop tanks before it reaches your unit. An uncleaned tank introduces sediment and occasional rust into the supply line, which clogs the inlet valve filter and the drain pump impeller over time. A periodic inlet filter check is cheap insurance against this.
- Voltage and imported machines
- The UAE standard is 220–240V single phase. Machines personally imported from markets with a different voltage standard, run through a step-down transformer, are more prone to control board failures if that transformer isn't well regulated.
- Heat exposure
- Machines kept in a villa laundry room, utility balcony, or any space that gets genuinely hot in summer see faster degradation of door seals, capacitors, and belt rubber than the same machine in a climate-controlled apartment utility closet.
- Household size and usage patterns
- Multi-generational households and homes with domestic staff often run a machine multiple times a day — well above the duty cycle most mid-range residential machines are designed around. This is the single biggest driver of early bearing and motor wear we see.
- Villa vs. apartment plumbing
- Villas often have a longer drain-hose run to an outdoor drain point than apartments do to an internal bathroom drain. Longer runs are more prone to blockages and back-pressure faults — one more reason villa owners see "won't drain" calls more often.
Repair or Replace?
We'd rather tell you honestly than always push a repair. A reasonable rule of thumb: if a single repair quote comes to roughly 40–50% or more of a comparable new machine's price, or if this is a second major repair within 12 months on a machine older than 8 years, replacement is usually the better economics.
Usually worth repairing
A 3-year-old machine with a AED 250 pump replacement. Mid-range new machines in the UAE typically run AED 1,100–1,600, so this repair is a small fraction of replacement cost on a machine with plenty of life left.
Worth considering replacement
An 8-year-old machine quoted AED 900 for a control board, especially if it's had another repair in the past year. At that point you're paying most of a new machine's price to extend an aging one.
See the full breakdown across appliances in our Repair or Replace guide.
Areas We Cover
We repair washing machines across Abu Dhabi, with a particularly high volume of calls from Mussafah. Don't see your area listed? Call to confirm — we likely cover it.
How Booking Works
- 1
Call or book online
Describe the fault and, if you have one, the error code shown on the display.
- 2
A technician arrives, usually same day
Fully equipped with common parts for a first-visit fix.
- 3
You get a fixed price after diagnosis
Nothing further happens until you say yes.
Frequently Asked Questions
How much does washing machine repair cost in Abu Dhabi?
How much does it cost to fix a washing machine drum, or replace worn drum bearings?
How much does a washing machine motor replacement cost?
How much does washing machine door seal or door lock repair cost?
How much does it cost to fix a washing machine that won't drain?
Do you repair commercial and industrial washing machines?
Do you offer same-day washing machine repair?
Which washing machine brands do you repair?
How much does Beko washing machine repair cost in Abu Dhabi?
How much does Electrolux washing machine repair cost in Abu Dhabi?
Do you fix all types of washing machines, or just specific brands?
Do you repair washer-dryer combo units?
Is a washer-dryer combo more expensive to repair than a separate washer and dryer?
Why is my washing machine not draining?
Why is my washing machine not spinning?
Why is my washing machine leaking water?
My washing machine stops partway through the cycle — why?
Why isn't my top-loader agitating?
Is it safe to keep using a washing machine that smells like burning?
Will repairing my washing machine myself void the manufacturer's warranty?
What does an error code on my washing machine mean?
Do you repair washing machines in Mussafah?
Do you cover Al Ain?
How long does a typical repair take?
Do you use genuine spare parts?
Is there a warranty on the repair itself?
Do you offer a washing machine service center, or only home visits?
How do I clean the lint filter on my washing machine?
Can you fix rust spots on a washing machine?
Ready When You Are
Book a washing machine technician today.
Fixed price confirmed before any work starts. Licensed technicians, 90-day workmanship warranty.
